Summary Of Supported Mvpn Profiles - Cisco CRS Series Configuration Manual

Label Switched Multicast (LSM) Multicast Label Distribution Protocol (mLDP) based Multicast VPN (mVPN) Support
MLDP In-band signalling supports transiting PIM (S,G) or (*,G) trees across a MPLS core without the need
for an out-of-band protocol. In-band signaling is only supported for shared-tree-only forwarding (also known
as sparse-mode threshold infinity). PIM Sparse-mode behavior is not supported (switching from (*,G) to
(S,G).
The details of the MLDP profiles are discussed in the Cisco IOS XR Multicast Configuration Guide for the
Cisco CRS Router

Summary of Supported MVPN Profiles

This tables summarizes the supported MVPN profiles:
Profile
Number
0
1
2
3
4
5
Cisco IOS XR Multicast Configuration Guide for the Cisco CRS Router, Release 5.2.x
38
Name Opaque-value
Rosen GRE N/A
Rosen MLDP Type 2 - Root
Address:VPN-ID:0-n
MS- PMSI (Partition) Cisco proprietary -
MLDP MP2MP Source- PE:RD:0
Rosen GRE with BGP N/A
-AD
MS- PMSI (Partition) Type 1 - Source-
MLDP MP2MP with PE:Global -ID
BGP -AD
MS- PMSI (Partition) Type 1 - Source-
MLDP P2MP with PE:Global -ID
BGP -AD
Implementing Multicast Routing on Cisco IOS XR Software
BGP-AD
N/A
N/A
N/A
• Intra-AS MI- PMSI
• S- PMSI for
Data-MDT
• I- PMSI with
empty PTA
• MS- PMSI for
partition mdt
• S- PMSI for
data-mdt
• S- PMSI cust
RP-discovery trees
• I- PMSI with
empty PTA
• MS- PMSI for
partition mdt
• S- PMSI for
data-mdt
• S- PMSI cust
RP-discovery trees
Data-MDT
PIM TLVs over
default MDT
PIM TLVs over
default MDT
N/A
PIM or BGP -AD
(knob controlled)
BGP-AD
BGP-AD