Table of Contents
Advertisement
Calculating Rates per Route
Command or Action
Step 10
Do one of the following:
• [sequence-number] permit source [source-wildcard]
• [sequence-number] permit source-prefix dest-prefix
Example:
RP/0/RP0/CPU0:router(config-ipv4-acl)# permit
239.1.1.1 0.255.255.255
Step 11
commit
Step 12
clear pim [vrf vrf-name] [ipv4 | ipv6] bsr
Example:
RP/0/RP0/CPU0:router# clear pim bsr
Step 13
show pim [vrf vrf-name] [ipv4 | ipv6] bsr candidate-rp
Example:
RP/0/RP0/CPU0:router# show pim bsr candidate-rp
Step 14
show pim [vrf vrf-name] [ipv4 | ipv6] bsr election
Example:
RP/0/RP0/CPU0:router# show pim bsr election
Step 15
show pim [vrf vrf-name][ipv4 | ipv6] bsr rp-cache
Example:
RP/0/RP0/CPU0:router# show pim bsr rp-cache
Step 16
show pim [vrf vrf-name][ipv4 | ipv6] group-map
[ip-address-name] [info-source]
Example:
RP/0/RP0/CPU0:router# show pim ipv4 group-map
Calculating Rates per Route
This procedure enables multicast hardware forward-rate counters on a per-VRF-family basis.
Cisco IOS XR Multicast Configuration Guide for the Cisco CRS Router, Release 5.2.x
96
Implementing Multicast Routing on Cisco IOS XR Software
Purpose
(Optional) Permits multicast group 239.1.1.1 for the
candidate group list.
The commands in
Step 6, on page 95
Tip
on page 95
can be combined in one command
string and entered from global configuration mode
like this: ipv4 access-list rp-access permit
239.1.1.1 0.255.255.255
(Optional) Clears BSR entries from the PIM RP group
mapping cache.
(Optional) Displays PIM candidate RP information for
the BSR.
(Optional) Displays PIM candidate election information
for the BSR.
(Optional) Displays PIM RP cache information for the
BSR.
(Optional) Displays group-to-PIM mode mapping.
and
Step 7,
Advertisement
Table of Contents
