Table of Contents
Advertisement
Configuration Examples for MVPN Profiles
CE3:
For information about configuring the CE router, using Cisco IOS software, see the appropriate Cisco IOS
software configuration documentation.
interface Loopback0
ipv4 address 122.122.122.122 255.255.255.255
!
interface GigabitEthernet0/1/3/0
ipv4 address 22.1.1.1 255.255.255.0
!
interface GigabitEthernet0/2/3/0
ipv4 address 122.1.1.2 255.255.255.0
multicast-routing
address-family ipv4
interface all enable
!
!
!
route-policy pass-all
pass
end-policy
!
router bgp 500
bgp router-id 122.122.122.122
address-family ipv4 unicast
redistribute connected
!
neighbor 122.1.1.1
remote-as 100
address-family ipv4 unicast
route-policy pass-all in
route-policy pass-all out
!
!
!
!
router pim vrf default address-family ipv4
rp-address 2.2.2.2
interface Loopback0
!
interface GigabitEthernet0/1/3/0
!
interface GigabitEthernet0/2/3/0
!
!
end
Configuration Examples for MVPN Profiles
The profile-wise configuration examples for the various MVPN profiles.
Configuration Examples for Inband mLDP profiles
Profile-6: VRF Inband mLDP
router bgp 100
mvpn
!
multicast-routing
mdt source Loopback0
vrf v61
Cisco IOS XR Multicast Configuration Guide for the Cisco CRS Router, Release 5.2.x
148
Implementing Multicast Routing on Cisco IOS XR Software
Advertisement
Table of Contents
