Configuring Ethernet OAM
Command or Action
Configuring Flexible VLAN Tagging for CFM
Use this procedure to set the number of tags in CFM packets in a CFM domain service.
SUMMARY STEPS
1. configure
2. ethernet cfm
3. domain name level level
4. service name bridge group name bridge-domain name
5. tags number
6. end or commit
DETAILED STEPS
Command or Action
Step 1
configure
Example:
RP/0/RP0/CPU0:router# configure
Step 2
ethernet cfm
Example:
RP/0/RP0/CPU0:router(config)# ethernet
cfm
Interface and Hardware Component Configuration Guide for Cisco NCS 5500 Series Routers, IOS XR Release 6.1.x
Purpose
• Entering yes saves configuration changes to the running
configuration file, exits the configuration session, and
returns the router to EXEC mode.
• Entering no exits the configuration session and returns the
router to EXEC mode without committing the
configuration changes.
• Entering cancel leaves the router in the current
configuration session without exiting or committing the
configuration changes.
• Use the commit command to save the configuration
changes to the running configuration file and remain within
the configuration session.
Purpose
Enters global configuration mode.
Enters Ethernet CFM global configuration mode.
Configuring Ethernet CFM
63