Interface And Hardware Component Configuration Guide For Cisco Ncs 5500 Series Routers, Ios Xr Release - Cisco NCS 5500 Series Configuration Manual

Configuring Ethernet OAM
Example 4
This example shows how to display operational state of other maintenance end points (MEPs) detected by a
local MEP:
RP/0/RP0/CPU0:router# show ethernet cfm peer meps
Flags:
> - Ok
R - Remote Defect received
L - Loop (our MAC received)
C - Config (our ID received)
X - Cross-connect (wrong MAID)
Domain fred (level 7), Service barney
Down MEP on TenGigE0/0/0/1, MEP-ID 2
================================================================================
St ID MAC address
-- ----- -------------- ------- ----------- --------- ------ ----- -----
>
R>
L
C
X
I
V
T
M
U>
Domain fred (level 7), Service fig
Down MEP on TenGigE0/0/0/12, MEP-ID 3
================================================================================
St ID MAC address
-- ----- -------------- ------- ----------- -------- ------ ----- -----
>
Example 5
This example shows how to display operational state of other maintenance end points (MEPs) detected by a
local MEP with details:
RP/0/RP0/CPU0:router#
Domain dom3 (level 5), Service ser3
Down MEP on TenGigE0/0/0/1 MEP-ID 1
================================================================================
Peer MEP-ID 10, MAC 0001.0203.0403
CFM state: Wrong level, for 00:01:34
Port state: Up
CCM defects detected:
CCMs received: 5
Out-of-sequence:
Remote Defect received:
Wrong Level:
Cross-connect (wrong MAID):
Wrong Interval:
Loop (our MAC received):
Config (our ID received):
Last CCM received 00:00:06 ago:
Level: 4, Version: 0, Interval: 1min
Sequence number: 5, MEP-ID: 10
MAID: String: dom3, String: ser3
Port status: Up, Interface status: Up
Domain dom4 (level 2), Service ser4
Down MEP on TenGigE0/0/0/2 MEP-ID 1
================================================================================
Peer MEP-ID 20, MAC 0001.0203.0402
Port
1 0011.2233.4455 Up
4 4455.6677.8899 Up
2 1122.3344.5566 Up
2 7788.9900.1122 Test
3 2233.4455.6677 Up
3 3344.5566.7788 Down
3 8899.0011.2233 Blocked 00:35
5 5566.7788.9900
6
7 6677.8899.0011 Up
Port
1 9900.1122.3344 Up
show ethernet cfm peer meps detail
V - Wrong Level
Interface and Hardware Component Configuration Guide for Cisco NCS 5500 Series Routers, IOS XR Release 6.1.x
I - Wrong interval
V - Wrong level
T - Timed out
M - Missing (cross-check)
U - Unexpected (cross-check)
Up/Downtime CcmRcvd SeqErr
00:00:01 1234
1d 03:04 3456
3w 1d 6h 3254
00:13 2345
00:23 30
00:34 12345
45
00:56 20
0
00:02 456
Up/Downtime CcmRcvd SeqErr
03:45 4321
0
5
0
0
5
0
0
Configuration Examples for Ethernet CFM
RDI Error
0 0 0
0 234 0
0 0 3254
6 20 2345
0 0 30
0 300 1234
0 0 45
0 0 0
0 0 0
0 0 0
RDI Error
0 0 0
71