Control Panel; Displays On The Screen - Pfaff 1571 Instruction Manual

Controls
7

Control panel

.11
The control panel is used to display and call up the machine functions for setting up and for
sewing operation, for entering parameter values and for reading error messages and service
settings.
The control panel has the following control and display elements:
7 Symbols on the display
.11.01
In addition to texts and set values, the following symbols are shown on the display.
The symbols only appear in the programmed sewing mode, see Chapter 10.02 Programmed
Sewing.
22
1
2
Fig. 7 - 11
The display screen 1 consists of a two-line, alphanumerical LCD display with 16 symbols
per line and is used to show relevant information and selection parameters.
The plus-minus keys 2 are used to select or alter the functions and parameters shown on
the display.
The function keys 3 are used to switch the relevant function on or off. Activated functions
are shown in each case by an illuminated LED.
Current program number
P
Current seam sector
T Seam input via "teach-in"
Deleting a program
DEL
Number of stitch in current seam sector
Maximum speed in current seam sector
Stitch length (forward feed) for the roller-presser
Stitch length (forward feed) for the feed wheel
3