8
Mounting the toothed belt / Basic position of the machine drive unit on the 1574
.02.05
•
In this position fit toothed belt 5 (Fig. 8 - 08).
•
Swing the bearing plate 6 of the motor, so that the toothed belt 5 is tensioned.
•
In this position tighten screws 7.
8
Fig.
8-08
11
13
Fig.
8
- 09
Installation and commissioning
10
9
S
R
•
Push synchronizer 8 onto the shaft so
that stop 9 is standing in the slot on the
synchronizer (see arrow)
•
Tighten screws 10.
•
Plug adapter cable 11 to socket X3 on
the control box.
•
Connect synchronizer 12 to plug S.
•
Connect motor to plug R.
•
Connect earth cable 13 to the case.
12
31