Pfaff 1571 Instruction Manual page 62

Input
The first seam section should have
- a double start backtack (2 forward and 2 reverse stitches)
- backtack speed of 700 spm
- stitch count (5 stitches)
- a 3.5 mm stitch length (for roller presser and feed wheel).
A
B
62
1
1 3.5
By pressing the corresponding +/- key set the stitch length for the roller presser at "3.5".
By pressing the corresponding +/- key set the stitch length for the feed wheel at "3.5".
By pressing the start backtack key, switch on the corresponding function.
The display changes for the input of the number of stitches forstart backtack.
1 A
1 2
By pressing the corresponding +/- key set the number of forward stitches at "2 ".
By pressing the corresponding +/- key set the number of reverse stitches at "2 ".
By pressing the corresponding +/- key set the backtack speed at "700".
By pressing the stitch count key, switch on the corresponding function.
The display changes for the input of the number of stitches.
If the "stitch count" function was already switched on, the menu appears for entering the
stitch number after pressing the scrolling key.
1
1
By pressing the corresponding +/- key set the number of stitches at"5".
3.5
B
2 700
0