Table of Contents
Advertisement
Install Speakers
Left
Speaker
Spacer
Left
Front
Speaker
Left
Speaker
Spacer
Interlocking
Material
Groove
Install Left and Right Front Speakers
1. Position left and right bottom speaker spacers with the interlocking
material facing the front and the grooved section at the bottom on top of
the component and software cabinet adjacent to the TV cabinet.
Note: Left and right spacers can be distinguished by their vertical openings. The
left spacers have their openings on the right side and the right spacers have their
openings on the left. All four spacers must have grooved sections at the bottom.
2. Use the #10-32 x 1-1/2" screws and washers provided to attach the
bottom left and right speaker spacers to the TV cabinet.
Important Note: Place the screw heads and washers in the inside of the
TV cabinet.
3. Position left and right top speaker spacers with the interlocking material
facing out on top of the speakers. Secure the top spacers to the TV
cabinet the same as the bottom spacers were attached in Step 2.
4. Connect the speaker wires to the corresponding positive (+) and
negative (–) terminals on the left and right front speakers.
5. Remove the grills from the speakers and position them on the bottom
spacers aligning the front of the speakers one half inch back from the
front edge of the spacers.
Opening
Screw
(From Inside)
Groove
Opening
Screw
(From Inside)
Opening
Screw
(From Inside)
Groove
Opening
Screw
(From Inside)
Groove
Right
Speaker
Spacer
Right
Front
Speaker
Right
Speaker
Spacer
Interlocking
Material
7
Advertisement
Table of Contents
