Connecting The Speakers - RCA RTD3133H User Manual

Connections and Setup

Connecting the speakers

Speaker wires are color-coded to match the terminals. Connect the speaker wire from the back of each
speaker to the corresponding color terminal at the back of the unit. Press down the tab to open the
terminal and insert the wire. Release the tab to lock wire in the terminal.
• When connecting the speakers, make sure the polarities ("+" speaker wire to "+" on the receiver. For
example, red wire to red terminal on the receiver) of speaker wires and terminals match. If the cords are
reversed, the sound will be distorted. Do not let the speaker wires touch each other, it will damage the
Home Theater's amplifi er.
Subwoofer
Gray and Black
To adjust each speaker volume level for optimum listening experience.
(1) Press the LEVEL and
(2) Press the VOL+/- buttons to adjust the value up or down (between 0dB and 10dB).
(3) Repeat step (1) and (2) for the other speakers (Left, Right, Center, Left Surround, Right Surround and
Subwoofer).
Speaker gains may be set to levels of up to 10dB, actual max levels may also depend on your Volume
Setting.
Center Speaker
Green and
Black
Purple and Black
Blue and Black
Right Left
/ button on the remote control to select a speaker channel.
Front Speakers
Right
Red and
Black
Rear Speakers
(Surround Sound)
- 7 -
Left
White and
Black
Insert
Press
Release