Table of Contents
Advertisement
Test the System
24
(continued)
Test the LaserDisc Player
See the LaserDisc player user's guide for complete LaserDisc player
operating information.
1. Remove the set screws from the LaserDisc player.
2. Press VCR2/LD on the remote to turn on the LaserDisc player,
audio/video receiver, TV, and tune the TV to channel 92. This will also
set the remote to operate the player.
3. Press OPEN/CLOSE on the player to open the disc table. Center a laser
disc in the groove of the table corresponding to the size of the disc
shown below.
5-Inch CD (CDV)
8-Inch LD
3-Inch CD
4
3
2
5
8
7
6
9
A
Y
P
L
1 2
1 1
1 4
1 0
1 3
1 6
1 5
1 7
1 9
3
2
1
4
7
6
5
8
1 1
1 0
1 3
9
1 2
1 5
1 4
1 7
1 6
1 8
4. Press PLAY on the remote or PLAY•PAUSE on the player to close
the disc table and start playing the laser disc.
5. Check the video and audio signals from the player.
Test the Audio CD Player
See the audio CD player's use and care guide for complete CD player operating
information.
1. Press AUDIO SHIFT, then CD on the remote or POWER on the player to turn on
the CD player and audio/video receiver.
2. Press OPEN/CLOSE on the front of the player to open the disc table.
3. Load a CD. Press OPEN/CLOSE on the player to close the disc table, and PLAY
to start playing the CD.
4. Check CD player's audio signal.
12-Inch LD
* On two-sided disc, the side facing up will
play first and then the other side will play.
as
CD (CDV) – Place label
side up.
LD* – Place side up you
want to play.
3
2
4
7
6
5
P
8
1 1
1 0
9
1 3
A
Y
L
1 2
1 5
1 4
1 7
1 6
1 9
2
1
4
3
6
5
8
7
1 0
9
1 2
1 1
1 4
1 3
1 6
1 5
1 8
1 7
Advertisement
Table of Contents
