Dvd Player; Basic Playback Features; Quick Search; Freeze Frame And Frame Advance - RCA UND RECEIVER RTD250 User Manual

Basic Playback Features

1. To select the DVD/CD input source, press the SOURCE
button on the main unit until "DVD/CD" appears on the
display. You may also directly press the DVD/CD source key
on the remote.
E SOUND MODE SOURCE
VOLUME
D I G I T A L
DVD
PRO.LOGIC
VCD
INTRORANDOM
CD
MP3
2. Press OPEN/CLOSE to open
the tray and load a disc,
with the label facing up.
Press OPEN/CLOSE again to
close the tray.
3. When READING disappears from the display, playback
starts automatically from the beginning of the disc, or the
disc menu is displayed on the screen.
• Press PLAY/PAUSE on the unit or PAUSE on the remote
to pause playing during playback. Press PLAY/PAUSE on
the main unit or PLAY on the remote to resume normal
playback.
DISC SKIP
• Press SKIP REVERSE to go back to the previous chapter
or SKIP FORWARD to move to the next chapter.
L C
LS LFE RS
OPEN/CLOSE DISC SKIP
D
i g i t a l
S o u n d
P r o c e s s o r
PROG
SC
• Press STOP once to stop playback and go into resume
mode.
NOTE
RESUME MODE:
The next time PLAY is pressed, the unit will begin
R
playback at the location where it was last stopped.
Press STOP key again to cancel the resume mode.

Quick search

1. While playing a disc, press REVERSE on the remote con-
trol to scan backwards through the disc. Press FORWARD
on the remote for scanning forward.
Press repeatedly to change searching speed to 1,2 or 3
times for VCD and 1,2,3 or 4 for DVD.
2. Press PLAY at any time to resume normal playback.
Freeze frame, frame advance
1. Press PAUSE on the remote control to freeze the picture
during playback. Each time you press it again, the next
frame is displayed.
2. Press PAUSE repeatedly to move forward in still frame
mode.
3. Press PLAY to resume normal playback.

DVD Player

DISC SKIP
EN
19