COPIER►BEFORE USING THE MACHINE AS A COPIER
BEFORE USING THE MACHINE AS A
COPIER
COPY MODE
There are two modes for copying: easy mode and normal mode.
Easy mode is limited to frequently used functions that allow you to smoothly perform most copy jobs.
If you need to select detailed settings or special functions, use normal mode. All functions can be used in normal mode.
EASY MODE
Easy mode makes it easy to select basic settings for copying.
1st screen
Show the size of the
placed original.
Reset all settings.
Scans the original and shows a preview
image.
2nd screen
Select function to be set
up.
You can select these functions in easy mode.
• Paper Select
►page 2-13
• 2-Sided Copy
►page 2-17
• Copy Ratio
►page 2-26
• Staple / Punch
►page
• Color Mode
►page 2-20
To select a function in easy mode
In "Settings (administrator)", select [System Settings] → [Common Settings] → [Operation Settings] → [Easy Mode Settings] →
[Easy Copy]
Original
8½x11
Paper
2-Sided Copy
Select
8½x11
Tray 1
1 → 1
CA
Preview
► PREVIEW SCREEN (page 1-17)
Original
8½x11
Color Mode
Original
Full Color
CA
Preview
2-48,
►page 2-53
Copy Ratio
Staple / Punch
100%
Copies
B/W
Start
Enter the number of copies.
Exposure
Card Shot
Auto
Copies
B/W
Start
• Original
►page 2-33
• Exposure
►page 2-23
• N-Up
►page 2-61
• Card Shot
►page 2-65
2-3
Change to normal mode.
► NORMAL MODE
Detail
(page 2-4)
Select function to be set up.
Off
Change the function
display.
Starts black and white or
Color
Start
color copying.
Detail
Off
Color
Start