COPIER►BEFORE USING THE MACHINE AS A COPIER
BEFORE USING THE MACHINE AS A
COPIER
COPY MODE
There are two modes for copying: easy mode and normal mode.
Easy mode is limited to frequently used functions that allow you to smoothly perform most copy jobs.
If you need to select detailed settings or special functions, use normal mode. All functions can be used in normal mode.
EASY MODE
Easy mode makes it easy to select basic settings for copying.
1st screen
When you set the original
size manually, the size
you set appears.
► SELECTING THE
ORIENTATION AND
SIZE OF THE
ORIGINAL (page
2-29)
Reset all settings.
Scans the original and shows a preview
image.
2nd screen
Select function to be set
up.
You can select these functions in easy mode.
• Paper Select
►page 2-12
• 2-Sided Copy
►page 2-16
• Copy Ratio
►page 2-22
• Staple
►page
2-38,
►page 2-38
To select a function in easy mode
In "Settings (administrator)", select [System Settings] → [Common Settings] → [Operation Settings] → [Easy Mode Settings] →
[Easy Copy]
Original
8½x11
Paper
2-Sided Copy
Select
8½x11
Tray 1
1 → 1
CA
Preview
► PREVIEW SCREEN (page 1-15)
Original
8½x11
Original
CA
Preview
Copy Ratio
100%
1
Copies
Enter the number of copies.
Exposure
N-Up
Auto
Off
Copies
• Original
►page 2-29
• Exposure
►page 2-19
• N-Up
►page 2-41
• Card Shot
►page 2-43
2-3
Change to normal mode.
► NORMAL MODE
Detail
(page 2-4)
Staple
Select function to be set up.
Off
Change the function
display.
Starts copying.
Start
Detail
Start