Specifying A Paper Position (Position Image) - Sharp MX-6580N User Manual

COPIER►OTHER FUNCTIONS

SPECIFYING A PAPER POSITION (POSITION IMAGE)

This function moves the scanned original to a specified position to make a copy.
You can make a copy in any desired position as you can fine adjust the position.
We recommend that you specify the top as the starting side of the original.
Originals
Auto ratio selection cannot be used.
Copy the original that you want to use for Move Copy.
1
Copying is performed without using move copy.
Measure the movement amount with the top as the starting side of the output
2
copy.
Tap the [Others] key, and tap the [Position Image] key.
3
Tap the [Original] key and specify the orientation of the original to have the orientation be correctly recognized.
► Specifying the orientation of the original (page 2-33)
Printing paper
Top edge of
paper
2-98
Position Image is used
Position Image is not used