Punch Module (Mx-Pn13B); Discarding Punch Waste - Sharp MX-6580N User Manual

BEFORE USING THE MACHINE►PERIPHERAL DEVICES

PUNCH MODULE (MX-PN13B)

The punch module can be installed on a finisher (100-sheet stapling) or saddle stitch finisher (100-sheet stapling) to
punch holes in paper to be output.
A saddle stitch finisher or finisher (100-sheet stapling) is required to install the punch module (100-sheet punching).

DISCARDING PUNCH WASTE

Punch waste from punched holes is collected in the punch waste box.
Follow the operation procedure to replace punch waste.
1
2
Open the front cover.
Grasp the punch waste box handle,
gently pull out the box, and discard the
punch waste.
Discard the punch waste in a plastic bag or other container,
taking care not to let the waste scatter.
1-147