Sharp MX-6580N User Manual page 173

BEFORE USING THE MACHINE►MAINTENANCE
6
7
8
9
Push the stamp unit back in.
Push the stamp unit in until it clicks into place.
Align the top left corner of the
document backplate sheet with back
left (at the tip of the mark) of the
document glass.
Close the automatic document feeder.
The document backplate sheet on the document glass is
fixed to the automatic document feeder.
Make sure that the document
backplate sheet is correctly attached
to the automatic document feeder and
then close the automatic document
feeder.
If the document backplate sheet is not correctly attached,
remove the document backplate sheet and then attach it
correctly again.
1-170