Sharp MX-6580N User Manual page 253

COPIER►OTHER FUNCTIONS
3
Others
Book Copy
Select Original Binding Edge.
Off
Left Binding
Right Binding
Back
To cancel the book copy setting:
Tap the [Off] key.
When inserting a cover, tap the [Cover Setting] key, and tap the [On] key.
4
To make a copy on the inserted cover sheet, check the [Make Copy on Cover (Duplex)] box so that
After the settings are completed, tap
To change the cover input tray:
Tap the [Paper Tray] key to display the tray selection screen. Tap the cover input tray on the tray selection screen. For
more information, see
• If the cover will be copied on, label sheets, transparency film, and tab paper cannot be used.
• This setting is not available when the covers/inserts function is disabled in the setting mode.
Tap the [Color Start] or [B/W Start] key to scan the first original page.
5
Scanning of the original starts.
6
• Copy settings cannot be changed when scanning additional pages.
• To cancel all settings:
Tap the [CA] key.
Tap the [Read-End] key to start copying.
7
Output
Erase
Erase Shadow Around
Color Mode
Proof Copy
Preview
Cover Setting
B/W Color
3 8½x14
Start Start
4 11x17 8½x11
twice.
"SELECTING THE PAPER TRAY FOR COPYING (page
2-79
Select a binding position.
When not inserting a cover, tap
5.
CA
Place the next opened original pages,
and tap the [Color Start] or [B/W Start]
key.
Tap the same key you tapped in step 5.
Repeat this step until all original pages have been scanned.
Scan the remaining original pages in the following order:
Inside of the front cover and the 1st page (facing pages)
The 2nd and 3rd pages (facing pages)
The last page and inside of back cover (facing pages)
twice. Then, go to step
appears.
2-13)".