Lenovo BladeCenter HX5 7873 Problem Determination And Service Manual page 42

Step 4. After you unpack ASU, use the following command syntax to set the UUID:
asu set SYSTEM_PROD_DATA.SysInfoUUID uuid_value [access_method]
uuid_value
Up to 16-byte hexadecimal value assigned by you.
access_method
The access method that you selected to use from the following methods:
• Online authenticated LAN access, use the following syntax: [host imm_internal_ip] [user imm_
user_id][password imm_password]
Where:
imm_internal_ip
The IMM internal LAN/USB IP address. The default value is 169.254.95.118.
imm_user_id
The IMM account (1 of 12 accounts). The default value is USERID.
imm_password
The IMM account password (1 of 12 accounts). The default value is PASSW0RD (with a
zero, not the letter O).
Note: If you do not specify any of these parameters, ASU uses the default values. When the
default values are used and ASU is unable to access the IMM by using the online authenticated
LAN access method, ASU automatically uses the unauthenticated KCS access method.
The following commands are examples of using the user ID and password default values and not
using the default values:
Example that does not use the user ID and password default values:
asu set SYSTEM_PROD_DATA.SYsInfoUUID uuid_value user user_id
password password
Example that does use the user ID and password default values:
asu set SYSTEM_PROD_DATA.SysInfoUUID uuid_value
• Online KCS access (unauthenticated and user restricted): You do not need to specify a value for
access_method when you use this access method.
Example:
asu set SYSTEM_PROD_DATA.SysInfoUUID uuid_value
The KCS access method uses the IPMI/KCS interface. This method requires that the IPMI driver
be installed. Some operating systems have the IPMI driver installed by default. ASU provides the
corresponding mapping layer. See the Advanced Settings Utility User's Guide for more details.
You can access the guide from http://www.ibm.com/systems/support/supportsite.wss/
docdisplay?lndocid=TOOL-ASU&brandind=5000016..
• Remote LAN access. Use the following syntax:
Note: When you use the remote LAN access method to access IMM using the LAN from a client,
the host and the imm_external_ip address are required parameters.
host imm_external_ip [user imm_user_id[[password imm_password]
Where:
imm_external_ip
The external IMM LAN IP address. There is no default value. This parameter is required.
imm_user_id
The IMM account (1 of 12 accounts). The default value is USERID.
26
BladeCenter HX5 Blade ServerProblem Determination and Service Guide