Lenovo BladeCenter HX5 7873 Problem Determination And Service Manual page 182

• Follow the suggested actions in the order in which they are listed in the Action column until the problem is
solved.
• See "Parts listing - BladeCenter HX5" on page 57 to determine which components are CRUs and which
components are FRUs.
• If an action step is preceded by "(Trained service technician only)," that step must be performed only by a
trained service technician.
Type Error Message
Warning System board, temperature (MEU
Overtemp) warning
Warning Memory device X, temperature
(DIMM X) warning [Note: X=1-16]
Warning Memory deviceX, temperature (MEU
DIMM X) warning [Note: X=1-24]
Error Code: 0x80070200
Note: Multiple events can be displayed for this error code. Be sure to read the message text to determine the
appropriate recovery actions.
Error Chassis, processor (CPU Cooling)
critical
166
BladeCenter HX5 Blade ServerProblem Determination and Service Guide
Action
1. Make sure that the room temperature is within the
operating specifications (see "Features and
specifications" on page 4).
2. Make sure that none of the air vents on the BladeCenter
chassis and on the blade server are blocked.
3. Make sure that all of the fans on the BladeCenter chassis
are running.
1. Make sure that the room temperature is within the
operating specifications (see "Features and
specifications" on page 4).
2. Make sure that none of the air vents on the BladeCenter
chassis and on the blade server are blocked.
3. Make sure that all of the fans on the BladeCenter chassis
are running.
1. Make sure that the room temperature is within the
operating specifications (see "Features and
specifications" on page 4).
2. Make sure that none of the air vents on the BladeCenter
chassis and on the blade server are blocked.
3. Make sure that all of the fans on the BladeCenter chassis
are running.
1. Make sure that the room temperature is within the
operating specifications (see "Features and
specifications" on page 4).
2. Make sure that none of the air vents on the BladeCenter
chassis and on the blade server are blocked.
3. Make sure that all the fans are on the BladeCenter
chassis are running (see the documentation for your
BladeCenter chassis).
4. Make sure Acoustics mode is not enabled on the
BladeCenter chassis (see the documentation for your
BladeCenter chassis).
5. (Trained service technician only) Make sure that the
microprocessor heat sink is properly attached to the CPU
(see "Removing a microprocessor and heat sink" on page
130 and "Installing a microprocessor and heat sink" on
page 134).
6. Replace the processor (see "Removing a microprocessor
and heat sink" on page 130 and "Installing a
microprocessor and heat sink" on page 134).