Table of Contents
Advertisement
Step 6.
Loosen each screw on the 1-node scalability card, using the provided 3/16" hex driver. Alternate
the loosening of each screw until both screws are removed.
Step 7.
Lift the 1-node scalability card off of the blade server and expansion blade and store the card in a
safe place.
Step 8.
Install either a 1-node Speed Burst card (see "Installing the 1-node speed burst card" on page 82)
or a scalability filler.To install a scalability filler, complete the following steps:
.
Chapter 4
Removing and replacing blade server components
93
Advertisement
Table of Contents
