Table of Contents
Advertisement
11. Radio flash system
Setting the radio wave transmitter module (RT-32; optional) in the main unit and connecting the
receiver RR-32 or RR-4; optional) to the flash provides a convenient system that enables one person
working alone to measure flash light without a synchro cord, thereby making it possible to take
measurements by triggering the flash from the exposure meter.
The unit has 32 channels when the radio wave transmitter module (RT-32) is mounted.
Channels 1-16 are single channels and channels 17-32 are quad channels, each of which can be
set to 4 sub-channels (a, b, c and d), thus making it possible to control a maximum of 4 flash units.
Meanwhile, there are two types of radio signal receiver, RR-32, capable of 32 channel settings, and
RR-4, capable of 4 channel settings.
< Example with optional radio wave receiver module RR-32 >
Open battery compartment cover !6 , remove
1.
connector cover and set the radio wave transmitter
module (optional) by aligning the connector with the
pins.
CAUTION
• To prevent damage due to static electricity, release static electricity stored in your body
by touching a metal object nearby (door knob, aluminum window frame, etc.) before
touching the radio wave transmitter module.
2.
Switch to the radio flash mode by using Set/change
dial t while pressing mode set button ! 0 .
6. Advanced Functions
MODE
-35-
Advertisement
Table of Contents
