Basic Operation - Sekonic L-608 CINE Operating Manual

4. Basic Operation

< Lumigrid > (opsional) (Receiving Angle 54°)
1. Remove the Lumisphere
The lumisphere unit is removed by holding the upper
and lower sections of upper and lower double
Lumisphere up/down ring q and turning it in the
counterclockwise direction while pushing the Lock
lever upward.
2. Mount the lumigrid
To mount Lumigrid, align the mount/removal indicator
on the Lumigrid with the
it, turn it in the clockwise direction and secure it in
place by raising the Lock lever until it clicks into place.
3. Take measurements by aiming the lumigrid precisely at the area of the subject to be measured
from the position or direction of the camera.
4. Follow the same procedure to mount the lumisphere.
CAUTION:
• Be sure to avoid touching the light receiving section when mounting or removing the lumisphere
or lumigrid.
-12-
mark and, while pressing