2.
Averaging function
This displays the average of two to nine of the values in memory.
Press the Measuring button ! 5 and take a
1.
measurement.
Press the Memory button u placing the measured
2.
value in memory.
When the Ave/ Δ EV button r is pressed, an
3.
average value for the two to nine measurements
display on the LCD. The value in memory and the
average values are displayed on the analog scale.
An "A" appears in LCD to indicate this is an average.
4.
The average mode can be canceled by pressing
the Ave/ Δ EV button.
3.
Brightness difference function
This function is useful for evaluating studio lighting and checking the evenness of the lighting set-up
across the subject area.
Take a measured value at a certain point as a standard value. The difference between the standard
value and a new measured value is displayed as EV and the f-stop in analog scale.
Example of adjusting lights using brightness measurement with shutter speed priority mode.
Turn the Lumisphere UP/DOWN ring q to lower it to
1.
the
mark position.
6. Advanced Functions
MEMORY
Averaging indicator
Averaged f stop
Number of memorized
value
AVE./∆EV
Averaged f stop
Memorized
f stop value
Set shutter speed
1/10
f stop
-25-