Table of Contents
Advertisement
6. Advanced Functions
3.
The set channel number will flicker on and off at this time.
Turn the Set/change dial to set the channel setting.
4.
In the Setting mode, "ch" appears on the ISO indicator. At the same time, channel numbers (1
to 16 and 17 to 32) appear on the F indicator. When the channel number is 17 to 32, sub-
channel (A, b, c and d) settings are displayed on the T indicator. In the absence of settings, "-
" appears in the figures.
5.
In sub-channel settings, after the channel is set to 17 to 32, the mode button is pressed. Following
this, the 4th figure on the T indicator flickers to indicate that settings may be made. Every time
the mode button is pressed, the flicker shifts from sub-channel No. : 4th figure → 3rd figure →
2nd figure → 1st figure → channel No., while permitting settings for each sub-channel. As the
Set/change dial is rotated in this state, setting ("A, b, c and d" displayed) and resetting ("-"
displayed) alternate. During this process, the indicator continues to flicker to indicate the channel
being set.
CAUTION
• When using quad channels 17-32, it is not possible to terminate this mode unless a sub-
channel has been set (a, b, c or d is displayed).
-36-
→
Set by manipulating the mode set button.
↔
Set by manipulating the Set/change dial.
Advertisement
Table of Contents
