Installing The Fork; Steering System Tightening Method - PEUGEOT Speedfight3 Workshop Manual

STEERING / FORK

Installing the fork

- Grease the cup bearing races.
- Install new ball cage bearings (1) (respect
the right way of installation).
- Fit the fork into the steering column.
- Install new ball cage bearings (2) (respect
the right way of installation).
- Install the upper cone (3).
- Install the dust cover (4).
- Fit the nut (5).

Steering system tightening method

- Tighten the nut (5).
Tightening torque: 40 Nm.
- Loosen and re-tighten the nut.
Tightening torque: 17 Nm.
- Install the rubber washer (6).
- Fit and finger tighten the nut (7) so that its
notches are aligned with those of the nut.
- Fit the lock washer (8) in the notches of the
2 nuts.
44
Reproduction ou traduction, même partielle, interdite sans autorisation écrite de Peugeot Motocycles
1
5
3
7
6
4
2
8