PEUGEOT Speedfight3 Workshop Manual page 34

SERVICE OPERATIONS
Slightly lubricate the brake cam and pin.
- Install the brake linings.
- Install the spring (9).
- Install the brake control cable, the barrel and
the adjusting nut (5).
- Install the wheel.
Tightening torque: 110 Nm.
N
When re-installing, use a new nut.
- Measure the free travel of the rear brake
control lever.
- Ajust the lever free travel using the adjusting
nut.
B. Brake control free travel: 10 to 20 mm.
- Install the exhaust.
N
Use a new exhaust gasket.
• Exhaust to cylinder mounting nut:
Tightening torque: 15 Nm.
• Exhaust to casing mounting bolt:
Tightening torque: 22 Nm.
32
Reproduction ou traduction, même partielle, interdite sans autorisation écrite de Peugeot Motocycles
7
6
5
B
4