Genie GS-2668RT Operator's Manual page 36

Operator's Manual
Operating Instructions
To Extend and Retract Platform
1 Lift the platform extension lock handle to the
horizontal position.
2 Push the platform extension lock handle to
extend the platform to the desired position.
Do not stand on the platform extension while trying
to extend it.
3 Lower the platform extension lock handle.
Emergency Lowering
At the Ground Controls
Push and hold the lift function enable
button and activate the down function.
In the event of a power failure, use the
emergency lowering function.
At the Platform Controls
Push and hold the lift function enable button and
activate the up/down rocker switch in the down
direction.
Operation From Ground with
Controller
Maintain safe distances between the operator, the
machine and fixed objects.
Be aware of the direction the machine will travel
when using the controller.
34
Outrigger Operation
(if equipped)
1 Position the machine below the desired work
area.
Note: The engine must be running for the outriggers
to operate.
2 Push and hold the auto level button.
3 Activate the up/down rocker switch in the down
direction. The outriggers will extend and level
the machine. A beep will sound when the
machine is level.
The indicator light on the lift function
enable button will turn red when one but
not all outriggers are down. All drive and
lift functions are disabled.
The light turns green on the lift function enable
button and on the individual outrigger buttons when
all the outriggers are in firm contact with the
ground.
The drive function is disabled while the outriggers
are down.
To control individual outriggers
1 Push and hold one or more outrigger buttons.
2 Activate the outrigger up/down rocker switch in
the desired direction to level the machine.
GS-2668 RT • GS-3268 RT
Fifth Edition · Second Printing
Part No. 133534