Genie GS-2668RT Operator's Manual page 34

Operator's Manual
Operating Instructions
Operation From Platform
1 Turn the key switch to platform control.
2 Pull out the ground and platform red Emergency
Stop button to the on position.
3 Start the engine.
To Position Platform
1 Push and hold the lift function
enable button.
2 Activate the up/down rocker
switch in the desired direction.
To Steer
1 Press and hold the function enable switch on the
control handle.
2 Turn the steer wheels with the thumb rocker
switch located on the top of the control handle.
To Drive
1 Press and hold the function enable switch on the
control handle.
2 Increase speed: Slowly move the control handle
off center.
Decrease speed: Slowly move the control
handle toward center.
Stop: Return the control handle to center or
release the function enable switch.
Use the color-coded direction arrows on the
platform controls and on the platform to identify the
direction the machine will travel.
Machine travel speed is restricted when the
platform is raised.
32
Drive Select Button
Indicator Light On Red
Indicator Light Flashing Red
Remove weight from the platform.
Push in and pull out the red Emergency Stop button
to reset the system.
If the platform is still overloaded, the light will
continue to flash.
GS-2668 RT • GS-3268 RT
Fifth Edition · Second Printing
Machine on incline symbol:
Low range operation for inclines
If the indicator light is on red, push
in and pull out the red Emergency
Stop button to reset the system.
If the light stays red, tag and
remove the machine from service.
If the indicator light is flashing red,
the platform is overloaded and no
functions will operate. An alarm will
sound at the platform controls.
Part No. 133534