Genie GS-2668RT Operator's Manual page 26

Operator's Manual
Inspections
1 Select a test area that is firm, level and free of
obstruction.
At the Ground Controls
2 Pull out the platform and ground red Emergency
Stop buttons to the on position.
3 Turn the key switch to ground control.
Result: The LCD screen will come on and
display .
SYSTEM READY
Note: In cold climates, the LCD readout screen will
need to warm up before the display appears.
4 Start the engine. See Operating Instructions
section.
Test Emergency Stop
5 Push in the ground red Emergency Stop button
to the off position.
Result: The engine should turn off and no
functions should operate.
6 Pull out the red Emergency Stop button to
the on position and restart the engine.
Test the Up/Down Functions
The audible warnings on this machine and the
standard horn all come from the same central
alarm. The horn is a constant tone. The descent
alarm sounds at 60 beeps per minute. The alarm
that goes off when the machine is not level sounds
at 180 beeps per minute.
7 Do not push the lift function
enable button. Push and hold the
platform up button.
Result: The platform should not raise.
24
8 Push and hold the lift function enable button.
Push and hold the platform up button.
Result: The platform should raise.
9 Push and hold the lift function enable button.
Push and hold the platform down button.
Result: The platform should lower. The descent
alarm should sound while the platform is
lowering.
At the Platform Controls
Test Emergency Stop
10 Push in the platform red Emergency Stop button
to the off position.
Result: The engine should shut off and no
functions should operate.
11 Pull the red Emergency Stop button out to the
on position.
Result: The indicator light should
be green.
Test the Horn
12 Push the horn button.
Result: The horn should sound.
GS-2668 RT • GS-3268 RT
Fifth Edition · Second Printing
Part No. 133534