Inspections - Genie GS-2668RT Operator's Manual

Operator's Manual

Inspections

Pre-operation Inspection
Be sure that the operator's, safety and
responsibilities manuals are complete, legible
and in the storage container located in the
platform.
Be sure that all decals are legible and in place.
See Decals section.
Check for engine oil leaks and proper oil level.
Add oil if needed. See Maintenance section.
Check for hydraulic oil leaks and proper oil level.
Add oil if needed. See Maintenance section.
Check for engine coolant leaks and proper level
of coolant. Add coolant if needed. See
Maintenance section.
Check for battery fluid leaks and proper fluid
level. Add distilled water if needed. See
Maintenance section.
Check the following components or areas for
damage, improperly installed or missing parts and
unauthorized modifications:
Electrical components, wiring and electrical
cables
Hydraulic hoses, fittings, cylinders and
manifolds
Fuel and hydraulic tanks
Drive motors
Wear pads
Tires and wheels
Engine and related components
Limit switches, alarms and horn
Platform overload components
22
Nuts, bolts and other fasteners
Platform entry gate
Beacon and alarms (if equipped)
Brake release components
Safety arm
Platform extension
Scissor pins and retaining fasteners
Platform control joystick
Generator (if equipped)
Outrigger housings and footpads (if equipped)
Check entire machine for:
Cracks in welds or structural components
Dents or damage to machine
Excessive rust, corrosion or oxidation
Be sure that all structural and other critical
components are present and all associated
fasteners and pins are in place and properly
tightened
Side rails are installed and snap pins and bolts
are fastened
GS-2668 RT • GS-3268 RT
Fifth Edition · Second Printing
Part No. 133534