Genie GS-2668RT Operator's Manual page 27

Fifth Edition · Second Printing
Test Up/Down Functions and Function Enable
13 Start the engine.
14 Activate the up/down rocker switch in the
direction indicated by the blue arrow.
Result: The platform should not
raise.
15 Push and hold the lift function
enable button.
16 Activate the up/down rocker switch in the
direction indicated by the blue arrow.
Result: The platform should raise.
17 Push and hold the lift function enable button.
18 Activate the up/down rocker switch in the
direction indicated by the yellow arrow.
Result: The platform should lower. The descent
alarm should sound while the platform is
lowering.
Test the Steering
Note: When performing the steer and drive function
tests, stand in the platform facing the steer end of
the machine.
19 Press and hold the function enable switch on the
control handle.
20 Depress the thumb rocker switch on top of the
control handle in the direction identified by the
blue triangle on the control panel.
Result: The steer wheels should turn in the
direction that the blue triangle points on the
control panel.
Part No. 133534
21 Depress the thumb rocker switch in the direction
identified by the yellow triangle on the control
panel.
Result: The steer wheels should turn in the
direction that the yellow triangle points on the
control panel.
Test Drive and Braking
22 Press and hold the function enable switch on the
control handle.
23 Slowly move the control handle in the direction
indicated by the blue arrow on the control panel
until the machine begins to move, then return
the handle to the center position.
Result: The machine should move in the
direction that the blue arrow points on the
control panel, then come to an abrupt stop.
24 Press and hold the function enable switch on the
control handle.
25 Slowly move the control handle in the direction
indicated by the yellow arrow on the control
panel until the machine begins to move, then
return the handle to the center position.
Result: The machine should move in the
direction that the yellow arrow points on the
control panel, then come to an abrupt stop.
Note: The brakes must be able to hold the machine
on any slope it is able to climb.
GS-2668 RT • GS-3268 RT
Operator's Manual
Inspections
25