Genie GS-2668RT Operator's Manual page 13

Fifth Edition · Second Printing
Operation on Slopes Hazards
Do not drive the machine on a slope that exceeds
the slope and side slope rating of the machine.
Slope rating applies to machines in the stowed
position.
Maximum slope rating, stowed position
GS-2668RT
GS-3268RT
Maximum side slope rating, stowed position
GS-2668RT
GS-3268RT
Note: Slope rating is subject to ground conditions
and adequate traction.
Part No. 133534
Fall Hazards
The guard rail system provides fall protection. If
occupant(s) of the platform are required to wear
personal fall protection equipment (PFPE) due to
job site or employer rules, PFPE equipment and its
use shall be in accordance with the PFPE
manufacturer's instructions and applicable
governmental requirements.
40% (22°)
Do not sit, stand or climb on the platform guard
35% (19°)
rails. Maintain a firm footing on the platform floor at
all times.
40% (22°)
35% (19°)
Do not climb down from the platform when raised.
Keep the platform floor clear of debris.
Close the entry gate before operating.
Do not operate the machine unless the guard rails
are properly installed and the entry is secured for
operation.
GS-2668 RT • GS-3268 RT
Operator's Manual
Work Area Safety
11