Genie GRC-12 Operator's Manual page 19

First Edition • First Printing
Platform Control Panel
1 Thumb rocker switch for steer functions
Press the thumb rocker switch in either
direction to activate the steer function.
2 Drive speed button
Press this button to activate slow drive function.
The indicator light will be on when slow drive is
selected.
3 Drive function select button
Press this button to activate the
drive function.
4 Red Emergency Stop button
Push in the red Emergency Stop button to the
off position to stop all functions. Pull out the red
Emergency Stop button to the on position to
operate the machine.
5 LED
Diagnostic read out, platform overload indicator,
battery charge indicator.
6 Lift function select button
Press this button to activate the
lift function.
Part No. 133136
7 Horn Button
Push the horn button and the horn will sound.
Release the horn button and the horn will stop.
8 Proportional control handle and function enable
switch for lift and drive functions
Lift function: Press and hold the function enable
switch to enable the lift function on the platform
control handle. Move the control handle in the
direction indicated by the blue arrow and the
platform will raise. Move the control handle in
the direction indicated by the yellow arrow and
the platform will lower. The descent alarm
should sound while the platform is lowering.
Drive function: Press and hold the function
enable switch to enable the drive function on
the platform control handle. Move the control
handle in the direction indicated by the blue
arrow on the platform entry gate and the
machine will move in the direction that the blue
arrow points. Move the control handle in the
direction indicated by the yellow arrow on the
platform entry gate and the machine will move
in the direction that the yellow arrow points.
GRC-12
Operator's Manual
Controls
17