Dr 6 Limit Value Settings - Siemens SIWAREX WP231 Manual

Scale parameters and functions

8.7 DR 6 limit value settings

8.7 DR 6 limit value settings
The switch-on and switch-off values for the limits are configured in data record DR 6.
In legal trade operation, the data record is not write-protected.
Procedure
● Check all parameters and modify them as required
● Transfer the data record to the scales
Table 8- 4 Assignment of data record 6
Variable Note
Data record Contains no. of data
number record
Length Data record length infor-
mation
Application Information about which
application the DR be-
longs to
Version iden- Information about the
tifier current data record ver-
sion
Basis of limits Gross / net basis of limit
values 1 and 2
0: Limit value 1 and limit
value 2 are based on the
gross value
1: Limit value 1 and limit
value 2 are based on the
net value
Reserve 1 Reserve
Limit value 1 Switch-on point for limit
ON, limit value 1 (% of measuring
value 2 ON, range)
limit value 1
OFF, limit
value 2 OFF
(Page 86)
Delay time for Time for delayed switch-
limit value 1 on of limit value 1 in ms
ON, delay
time for limit
value 2 ON
(Page 86)
Limit value 1 Switch-off point for limit
ON, limit value 1 (% of measuring
value 2 ON, range)
limit value 1
OFF, limit
value 2 OFF
(Page 86)
84
Type Length
(bytes)
USHORT 2
USHORT 2
USHORT 2
USHORT 2
USHORT 2
USHORT 2
FLOAT 4
TIME 4
FLOAT 4
Rw Default
r 6
r 60
r 101
r 1
rw 0
rw 0
rw 0
rw 0
rw 0
Manual, 07/2014, A5E31238908A-02
Min. Max. Modbus
Register
- - 1234
- - 1235
- - 1236
1 65635 1237
0 1 1238
0 - 1239
maxi- maxi- 1240
mum mum
num- number
ber range
range
0 maxi- 1242
mum
number
range+
maxi- maxi- 1244
mum mum
num- number
ber range
range
SIWAREX WP231