Table of Contents
Advertisement
System Description
System Overview with Functional Variants
Code keypads
There are two types of code keypads: SmartKey code keypads and lockable code keypads.
The code keypad, used in conjunction with the reader, allows arming and disarming of the in-
trusion alarm system only after the correct combination of numbers has been entered on the
keypad.
Holdup alarm: if someone is forced to disarm the intrusion alarm system under duress, a silent
alarm (hold-up alarm) can be set off remotely via the code keypad.
The code keypad can be surface mounted or recessed mounted (outside the secure area).
SmartKey code keypad with integrated reader
Function variants
Reader
Non-contact reader for surface-mounting or recessed-mounting (IP55 junc-
tion box).
SmartKey code keypad with integrated reader
Code keypad with integrated non-contact reader for
surface or recessed mounting (IP55 junction box).
SmartKey code keypad
Code keypad for surface mounting or recessed mounting (IP55 junction
box).
The SmartKey code keypad with integrated reader combines
the function of the reader + the SmartKey code keypad in one
unit.
Initial set-up and operation is the same as with one reader + one
code keypad. Instructions for start-up and operation are en-
closed with the corresponding device, reader or SmartKey code
keypad.
The reader for the SmartKey key is located in the middle of the
device (not visible from the outside). To operate, hold the Smart-
Key up to the center of the code keypad at a maximum distance
of 2 cm and press the button on the key.
Reader + lockable code keypad
Non-contact reader for surface mounting or recessed
mounting (IP55 junction box). Lockable code keypad
for surface mounting or recessed mounting (recessed
mounting with mounting kit).
4
Advertisement
Table of Contents
