Table of Contents
Advertisement
Disarming the System from the Reader or Code Keypad
Disarming the system with key and user code
1. Press and hold the key button and hold the key up to the reader for 3 seconds until you hear a
short signal from the buzzer.
The red LED is activated, signaling that the system is currently armed.
The green LED starts to flash, signaling that the disarming process has commenced.
2. If programmed: enter your user code and confirm your input with the key "
Further reader signals (LED) follow as described in the left-hand box (disarming successful)
or in the right-hand box on the right (disarming unsuccessful).
The red LED is deactivated.
The green LED and the buzzer are
activated for 2.5 seconds (continuous
signal).
Disarming was successful.
Disarming the system with a code
1. Enter your user number + user code.
The red LED is activated, signaling that the system is currently armed.
The green LED starts to flash
Further keypad signals (LED) follow as described in the left-hand box (disarming success-
ful) or in the right-hand box on the right (disarming unsuccessful).
The red LED is deactivated.
The green LED and the buzzer are
activated for 2.5 seconds (continuous
signal).
Disarming was successful.
Operating the System
The green LED is deactivated.
The red LED is activated for 5 seconds.
The buzzer emits intermittent tones for 5
seconds.
Disarming was unsuccessful. See the
table "Operating Problems During Normal
Operation" for assistance.
,
signaling that the disarming process has commenced.
The green LED is deactivated.
The red LED is activated for 5 seconds.
The buzzer emits intermittent tones for 5
seconds.
Disarming was unsuccessful. See the
table "Operating Problems During Normal
Operation" for assistance.
35
-
"
"
" or
.
Advertisement
Table of Contents
