Step 5 - Place The Displays And Create The Geometry - Belkin F1DN104K-3 Configuration Manual

Step 5 – Place the Displays and Create the
Geometry
At this stage the administrator will create the overall displays setup.
The administrator can drag and drop the displays that were created
in proportion which reflects the size and shape of his actual displays
until he/she create a picture similar to his real user environment.
Each display is clearly marked by its appropriate computer number
and display number as entered by the administrator in the previous
stage. Displays can be connected (touching) or have some distance
all based on the actual geometry required.
Once the displays are placed, yellow "bridges" will automatically
appear to indicate areas in which the mouse "teleport" itself from
one display to another.
Clicking on one of these yellow bridges will remove it which will
prevent the mouse curser from "teleporting" through that bridge.
Examples:
Example 1 - The following setup creates a corridor from the top right
of display 2 computer 2 to the top bottom left of display 1 computer
1. Trying to drag the mouse through the red lines will not work.
Figure 7 – Horizontal yellow bridge between two displays
13
Section 2 - Configuration
Example 2 – Both below configurations creates identical setups in
which mouse curser moves from the right of computer 2 display 2 to
the left of computer 1 display 1.
Figure 8 – Touching vs. distant displays example