Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Belkin F1DN104P-3
Summary of Contents for Belkin F1DN104P-3
-
Page 1: User Manual
Advanced Secure DisplayPort™ KVM User Manual F1DN104P-3 – Advanced Secure 4-Port DisplayPort KVM, PP 3.0 F1DN104W-3 – Advanced Secure 4-Port DisplayPort Dual-Head KVM, PP 3.0 F1DN104Q-3 – Advanced Secure 4-Port Quad-Head KVM, PP 3.0 Document Number HDC10386 Rev.C... -
Page 2: Table Of Contents
Color Code Chip Installation ....... 20 Belkin Advanced Secure DisplayPort KVM... -
Page 3: Introduction
• Interchangeable Port Color Chips which is capable of transferring various types of information, such as USB and Ethernet other than display. Belkin has developed this unique • Port-Naming Labels Secure KVM switch with the highest possible security in mind, assuring no leakage of information between connected computers through any •... -
Page 4: Safety Precautions
– The product has been dropped or is physically damaged. – The product shows obvious signs of breakage or loose internal parts. – In case of external power supply – If power supply overheats, is broken or damaged, or has a damaged cable. Belkin Advanced Secure DisplayPort KVM ®... -
Page 5: User Guidance & Precautions
#1 and default settings will be LED will flash green and video will not work. restored, erasing all user-set definitions. When connecting a non-qualified USB device, CAC LED will flash green and USB device will be inoperable. Belkin Advanced Secure DisplayPort KVM ®... -
Page 6: Belkin ® Advanced Secure Displayport Kvm
12. If you are aware of any potential security vulnerability while installing or operating product, please remove product from service immediately and contact us in one of the ways listed in this manual. Belkin Advanced Secure DisplayPort KVM ®... -
Page 7: Overview
All these features contribute to strong isolation between computer interfaces, maintained even when product is powered off. Belkin Advanced Secure DisplayPort KVM ®... -
Page 8: Tamper Evident Labels
Belkin Technical Support at: (800) 282-2355. Metal enclosure is designed to resist mechanical tampering with all microcontrollers protected against firmware-read, modification and active anti-Tampering system rewrite. -
Page 9: Other Features
SECTIONS Table of Contents other features The Belkin Advanced Secure DisplayPort KVM was designed with the usb support user in mind for today’s IT environment. Below is a summary of some The Switch is compatible with USB technology and suppor ts features incorporated into the Switch. -
Page 10: Belkin ® Advanced Secure Displayport Kvm
Indicators increased dramatically to over 15 years. Each port button number illuminates to indicate that the console currently controls the corresponding computer. As a port selector is pushed, the LED number will light up. Belkin Advanced Secure DisplayPort KVM ®... -
Page 11: Equipment Requirements
Requirements Cables belkin smart Cables Belkin highly recommends you use Belkin DisplayPort/USB KVM Cable F1D9011b06 (USB to DVI-I Smart Cable, 6’) Kits for your Switch to help ensure superior performance. These cables F1D9017b06 (DP to DVI Smart Cable, 6’) offer the highest quality possible to ensure optimal data and video transmission. -
Page 12: System Requirements
The console video ports are compatible with DisplayPort1.1/1.2 fully supported due to security policy. If they are supported, only classical keyboard (HID) operation will be functional. It is recommended to use standard USB keyboards. Belkin Advanced Secure DisplayPort KVM ®... -
Page 13: Unit Display Diagrams
SECTIONS Table of Contents unit display diagram, front View (F1DN104P-3 model shown) LED Indicator Tamper-Evident Seal Name Label Guide CAC Enable Switch Port Selector Color Chip (F1DN104C-3 model only) Belkin Advanced Secure DisplayPort KVM ®... - Page 14 SECTIONS Table of Contents unit display diagram, back View (F1DN104P-3 model shown) 9 10 11 12 13 14 Console USB CAC Reader Port and LED Console PS/2 mouse port Video Diagnostic LED DCU port (Non operative, for future use)
- Page 15 Computer audio port Console HDMI Ports Console USB Mouse Port Computer CAC USB Port Computer DVI Port Console USB Keyboard Port Mounting Track Computer DP Ports PS/2 Console Keyboard Port DC Power Jack Mounting Track Belkin Advanced Secure DisplayPort KVM ®...
- Page 16 Console HDMI Ports Computer audio port Console Audio Input Jack Computer DP Ports Computer CAC USB Port Console USB Mouse Port Mounting Track Console USB Keyboard Port Mounting Track PS/2 Console Keyboard Port DC Power Jack Belkin Advanced Secure DisplayPort KVM ®...
-
Page 17: Specifications
(F1DN104P-3) no . of Computers supported 2 x HDMI1.4 female connector (F1DN104W-3) no . of monitors per F1DN104P-3 - 1 monitor computer supported 3 x HDMI1.4 female connector & 1 x F1DN104W-3 - 2 monitors DVI-I female connector(F1DN104Q-3) F1DN104Q-3 - 4 monitors Console speaker 1/8"... - Page 18 SECTIONS Table of Contents CPu Monitor Ports 1 x DisplayPort 1.1/1.2 female weight F1DN104P-3 3.9 lbs.(1.77kg) connector (F1DN104P-3) F1DN104W-3 4.85 lbs.(2.2kg) F1DN104Q-3 5.85 lbs.(5.65kg) 2 x DisplayPort 1.1/1.2 female connector (F1DN104W-3) Made in Designed in California. Assembled in 3 x DisplayPort 1.1/1.2 female US with US and Foreign components.
-
Page 19: Installation
If the unit’s enclosure appears disrupted or if all channel- configuration. Rack-mount brackets are included with the Switch. select LEDs flash continuously, please remove product from service immediately and contact Belkin Technical Support Consider the following when deciding where to place the switch: at (800) 282-2355. -
Page 20: Connection And Installation
2 – Power up 2.1 Turn the monitor on. 2.2 Power up the Belkin Advanced Secure DisplayPort K VM by connecting the power. The display diagnostic LED should be solid green a few seconds after power up. This indicates the display EDID information has been captured and secured. - Page 21 #1, #2 and then #3. this User Manual. The USB cable must be connected directly to a free USB port on the computer, with no USB hubs or other devices in between. Belkin Advanced Secure DisplayPort KVM ®...
-
Page 22: Color Code Chip Installation
Table of Contents Color Code Chip Installation Port name label The Belkin Advanced Secure DisplayPort KVM’s port-selector buttons The included network-name and blank labels can be placed in the area can be color-coded for easier identification. Refer to the installation underneath the port-selector buttons for port identification. -
Page 23: Operating The Kvm Switch
Please note that the default port at power-up is port 1. In case of a power failure or if the power is cycled, the Switch will default to port 1. Belkin Advanced Secure DisplayPort KVM ®... -
Page 24: Common Access Card (Cac) Configuration And Operation
CAC, and the other end to the CAC port on and controlled separately to the keyboard, mouse, video and audio. the Belkin Advanced Secure DisplayPort KVM that corresponds to the computer. 1.2 Enable CAC for the same port connection in Step 1.1 by switching the CAC switch to the right. -
Page 25: Troubleshooting
If the unit’s enclosure appears works fine when I connect my keyboard, video, and mouse directly disrupted or if all the port LEDs flash continuously, please call Belkin to my computer . Technical Support at (800) 282-2355. - Page 26 • Ensure that the power switch is in the ON position. computer, and monitor. • Check that the display is turned on • With everything connected, power-cycle the Belkin Advanced • Check that the cables are connected, and check that the display Secure DisplayPort KVM to reset the video.
- Page 27 KVM . This is normal operation. The lock-state information is fully functional. Due to the security of the Belkin Advanced Secure DisplayPort KVM and known exploitation of lock-state information for leakages, the LED status is not supported. Please refer to the operating system for verification of the lock-state information for CAPS, NUM, and Scroll Lock.
- Page 28 The CaC reader is not functioning . • Check to see if the LED is illuminated for the CAC reader. • Confirm that the CAC reader switch on the Belkin Advanced Secure DisplayPort KVM is properly set to the ON position.
-
Page 29: Information
Belkin International, Inc. (“Belkin”) warrants to the original purchaser of Vista, CA 90094, declare under our sole responsibility that the this Belkin product that the product shall be free of defects in design, products comply with Part 15 of the FCC Rules. Operation is subject assembly, material, or workmanship. - Page 30 Table of Contents what is not covered by this warranty? All above warranties are null and void if the Belkin product is not Your Belkin Customer Service Representative will then instruct you on how to forward your receipt and Belkin product and how to provided to Belkin for inspection upon Belkin’s request at the sole...
- Page 31 DIRECT, INDIRECT, CONSEQUENTIAL OR MULTIPLE DAMAGES SUCH AS, BUT NOT LIMITED TO, LOST BUSINESS OR PROFITS ARISING OUT OF THE SALE OR USE OF ANY BELKIN PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. This warranty gives you specific legal rights, and you may also have other rights, which may vary from state to state.
- Page 32 SECTIONS Table of Contents Reporting belkin Product security Vulnerability If you are aware of potential security vulnerability with any Belkin Government product, we encourage you to contact us immediately at the following email address: gov_security@belkin .com or our technical support line at: 1-800-282-2355.
- Page 33 © 2015 Belkin International, Inc. All rights reserved. All trade names are registered trademarks of respective manufacturers listed. Windows and Windows Vista are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. Mac OS is a trademark of Apple Inc., registered in the U.S. and other countries.