Step-By-Step Installation Guide - Belkin OmniView F1DK102P User Manual

Step-by-Step Installation Guide

This section provides complete instructions for the hardware setup of a
single Switch.
Important Note
Before attempting to connect anything to the Switch or to any computer, make
sure that everything is powered off. Plugging and unplugging cables while
computers are powered on can cause irreversible damage to your computers,
data, and/or to the Switch. Belkin Corporation will not be responsible for damage
caused in this way.
Connecting the Console
1. Power down all computers.
2. Connect your PS/2-type keyboard
and mouse to the KEYBOARD and
MOUSE ports located on the front
panel of your Switch.
3. Take the VGA cable that is
attached to your monitor and
connect it to the VGA port on the
front panel of the Switch.
INSTALLATION INSTALLATION
7