Utility (KMC Loader) Software ......35 Belkin Secure KM Features ....... . 13 Product Specifications .
Page 3
Using the problem. Belkin Secure KM users can see all the connected computers at the same time and easily decide on which computer he wants to work.
• AC Power Cord (F1DN108K-3 only) toll-free at (800) 282-2355. • Interchangeable Port Color Chips • Port-Naming Labels Please note: Belkin Secure KM Products cannot be upgraded, serviced • Belkin USB configuration cable or fixed. • User Manual Important security note: If you are aware of potential security vulnerability while installing or operating this product, we encourage you to contact us immediately at the following email address: gov_security@belkin .com...
– The product shows obvious signs of breakage or loose internal parts. – In case of external power supply – If power supply overheats, is broken or damaged, or has a damaged cable. Belkin Secure 4/8 port KM Switch User Manual ®...
Page 6
#1 and default settings will be will flash green and video will not work. restored, erasing all user-set definitions. When connecting a non-qualified USB device, CAC LED will flash green and USB device will be inoperable. Belkin Secure 4/8 port KM Switch User Manual ®...
Page 7
12. If you are aware of any potential security vulnerability while installing or operating product, please remove product from service immediately and contact us in one of the ways listed in this manual. Belkin Secure 4/8 port KM Switch User Manual ®...
EDID emulation is done at power up and blocks all EDID/MCCS writes. For DisplayPort video, filtration of AUX channel exists to reject unauthorized transactions. Belkin Secure 4/8 port KM Switch User Manual ®...
LED number will light up. active anti-Tampering system Belkin Secure Switch is equipped with an always-on active anti-tampering system. If mechanical intrusion is detected by this system, the Switch will be permanently disabled and LED will blink continuously.
SECTIONS Table of Contents operational features The Belkin Secure KM was designed with the user in mind for today’s audio support IT environment. Below is a summary of some key operational features The Belkin Secure KM supports audio out switching. Microphone switching incorporated into the Product.
SECTIONS Table of Contents What is seamless Cursor switching? Seamless Cursor Switching (SCS) is implemented in Belkin Secure KMs to enable seamless cursor and keyboard switching between multiple displays. SCS allows to configure any desired multiple display configuration using KM switches from channel 3 to 2 KM switches from channel 2 to 3 the same, or different size displays and resolutions.
Cables user operating-system (os) support Belkin highly recommends you use you use Belkin Cable Kits for your The Belkin Secure KM is compatible with computers running on, the product to help ensure superior security and performance. These cables following OS platforms: offer the highest quality possible and optimal data transmission.
Page 13
USB hubs and other USB-integrated devices, may not be fully supported due to security policy. If they are supported, Ps/2 Mouse and Keyboard console ports (f1dn104K-3) only classical keyboard (HID) operation will be functional. It is The product console PS/2 keyboard and mouse ports are compatible with recommended to use standard USB keyboards.
Page 14
Programming Cable Special programming cable is needed to connect the product to the setup PC and configure it. Cable is supplied with each product. If needed, please contact Belkin Sales or Technical Support for additional cable. Belkin Secure 4/8 port KM Switch User Manual...
Page 15
SECTIONS Table of Contents f1dn104K-3 front Panel features Port Selector Name Label Guide Tamper-Evident Seal LED Indicator Color Chip f1dn104K-3 back Panel features 3 4 5 DCU port - non operable, for future use Console USB mouse port Console PS/2 mouse port...
Page 16
DCU port - non operable, for future use Console USB keyboard port AC power switch Console Audio Out port USB KM port AC power input jack Console USB mouse port Computer audio port Belkin Secure 4/8 port KM Switch User Manual ®...
3 years Console Mouse Input (F1DN104K-3) USB Type A + dimensions (F1DN104K-3) 12.5 (W) x 6.4 (D) x 1.7 (H) inch PS/2 Mini-DIN 6-pin female connector / 317.5 (W) X 162.56 (D) X 43.18 (H) mm (F1DN108K-3) USB Type A (F1DN108K-3) 17.25 (W) x 7.95 (D) x 1.7 (H)
Warning: Avoid placing cables near fluorescent lights, air-conditioning If one or more label is damaged or missing, contact Belkin Tech Support equipment, or machines that create electrical noise (e.g., vacuum cleaners).
Caution: Do not connect a microphone or headset to the audio output port. step 1 – Connecting the Console devices to the belkin secure KM Warning: Before attempting to connect anything to the Switch, or your step 2 – Connecting Computers to the belkin secure KM computers, please ensure that all computer equipment and devices are 2.1 Connect each computer to the Switch ports marked “K/M”...
Page 20
The Belkin Advanced Secure KM Switch’s port-selector buttons can be color- coded for easier identification. Refer to the installation instructions below. 3.2 Connect the Belkin Secure KM to the cable DC plug of the 12V 1.5A external AC/DC power supply (F1DN104K-3).
Page 21
InsTallaTIon SECTIONS Table of Contents f1dn104K-3 Typical system installation Displays Computers Mouse Mouse Audio Keyboard PS/2 K PS/2 M Audio Audio Audio Audio Console Audio Keyboard Belkin Secure 4/8 port KM Switch User Manual ®...
Page 22
InsTallaTIon SECTIONS Table of Contents f1dn104K-3 typical installation with multiple displays per connected PC Displays Computers Belkin Multi-Display Mouse Mouse Driver Required for machines running two displays or more Mouse Audio Keyboard PS/2 K PS/2 M Audio Audio Audio Audio...
SECTIONS Table of Contents advanced setup Once the Belkin Secure KM is connected and powered on, essential The loaded configuration will also include the following settings by default: operational settings needs to be configured. • All displays are 1920 x 1200 resolution, same size (26” diagonal) The first and most important setting of the Switch is the monitor positioning.
Page 24
F11, 3, 0 F11, F10 F11, 2, 0 F11, 1, 0 (8-Port Only) Pre-Defined Configuration List - Pre-Defined Configuration List - Using CTRL, CTRL, F11, Fx Using CTRL, CTRL, F11, x, y Belkin Secure 4/8 port KM Switch User Manual ®...
Page 25
Driver can be loaded from Belkin settings preset. website. If internet access is not allowed - contact Belkin to order the KM Switch programming Kit (software CD is included in that kit. In addition, the Switch settings include a global speed setting with input...
Prevent transition while dragging feature (jammed buttons, firmware integrity). The Belkin Secure KM offers a unique feature that further improves Try to power cycle product. If problem persists please contact your system usability – Prevent Transition while Dragging. If the user drags an object administrator or technical support.
Page 27
If you are aware of potential security vulnerability while installing or operating this product, we encourage you to contact us immediately at the following email address: gov_security@belkin .com The gov_security@belkin .com email address is not intended to reach technical support on Belkin products or services. Belkin Secure 4/8 port KM Switch User Manual ®...
(disconnect and re-plug the power adapter). • If the blinking and clicking still persist after power cycling the unit, it is possible that the device anti-tampering system was triggered. Change the unit and call Belkin technical support. Belkin Secure 4/8 port KM Switch User Manual...
Some non-standard keyboard functions are disabled by the switch to prevent • Check that the mouse you are using is connected properly to the security risks. Contact Belkin Tech Support for latest compatibility list. Switch. • Check that the USB cable between the Switch and the computer is video completely connected.
You begin Please contact belkin to order the KM switch accessory Kit . This kit includes the Cd roM disc containing files for the belkinKMadminsetup .exe (installs the KMC Creator and KMC loader), KMMultidisplaysetup .exe (installs the belkin KM Mouse...
7”. The project name can be read from the KM after loading. • Product Model – The product model can be found on the back sticker of the KM switch. The Belkin Secure KM can both support two to four computers.
Page 32
For example, for a monitor with a native screen resolution of 1680x1050 which is used in Portrait please enter resolution of 1050x1680. Number of Monitors Display SIze Native Resolution Belkin Secure 4/8 port KM Switch User Manual ®...
Page 33
Enter the details for the secondary display. To find out what are the vertical and horizontal MS values, select the secondary monitor and move it slightly. Two numbers will appear on the secondary monitor. Enter both numbers in the dialog. Belkin Secure 4/8 port KM Switch User Manual ®...
Page 34
To enable the bridge between monitors, just drag one monitor to the desired monitor, having them touch each other. Pull apart the monitors, and the bridge should appear between the monitors again. Belkin Secure 4/8 port KM Switch User Manual ®...
Page 35
3 – The setup shown below is invalid. There is no interface between the two monitor hence the curser will not move. It is recommended to use the below bottom setup instead which will give similar results. Belkin Secure 4/8 port KM Switch User Manual ®...
Page 36
• Computers with multi displays Rule #2 – All displays connected to the same PC must be stuck to one another. It is impossible to have distance between two displays connected to the same PC. Belkin Secure 4/8 port KM Switch User Manual ®...
(KMC loader) software loading utility Belkin’s Secure KM Configuration Utility (KMC Loader) allows you to load the configured .kmc file (created per the procedure defined in Appendix A Once the KM Switch is in setup mode and is connected to the PC: of this manual) into the Secure KM Switch.
Page 38
After loading is complete, restart the KM by disconnecting and then reconnecting power. Reconnect the mouse back to the mouse port and the new configuration will apply. Figure 3 – KM Loading Utility capture – File not correct Belkin Secure 4/8 port KM Switch User Manual ®...
Page 39
If the utility cannot communicate with KM switch, it will prompt “KM not ready” and no communication port will appear. Figure 4 – Communication between KM and utility has been lost Belkin Secure 4/8 port KM Switch User Manual ®...
Belkin International, Inc. (“Belkin”) warrants to the original purchaser of this CA 90094, declare under our sole responsibility that the products comply Belkin product that the product shall be free of defects in design, assembly, with Part 15 of the FCC Rules. Operation is subject to the following two material, or workmanship.
Page 41
Table of Contents What is not covered by this warranty? All above warranties are null and void if the Belkin product is not provided Belkin reserves the right to review the damaged Belkin product. All costs to Belkin for inspection upon Belkin’s request at the sole expense of...
Page 42
DIRECT, INDIRECT, CONSEQUENTIAL OR MULTIPLE DAMAGES SUCH AS, BUT NOT LIMITED TO, LOST BUSINESS OR PROFITS ARISING OUT OF THE SALE OR USE OF ANY BELKIN PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. This warranty gives you specific legal rights, and you may also have other rights, which may vary from state to state.
Page 43
SECTIONS Table of Contents reporting belkin Product security vulnerability If you are aware of potential security vulnerability with any Belkin Government product, we encourage you to contact us immediately at the following email address: gov_security@belkin .com or our technical support line at: 1-800-282-2355.