Multi Displays Rules; Step 6 - Complete Setup - Belkin F1DN104K-3 Configuration Manual

Section 2 - Configuration

Multi Displays Rules

Computers with Multi displays – When one of the computers is
configured with multi displays the setup of those displays connected
to the same PC must be similar to that configured on the MS setup.
Computers with Multi Displays 2 – All displays connected to the same
PC must be stuck to one another. It is impossible to have distance
between two displays connected to the same PC.
Step 6 – Complete Setup
Once ready the administrator will press the Complete Setup bottom.
A file will be generated and downloaded to the PC automatically.
Next step covered in "KM Switch Configuration Loading Utility
Manual" available on web-site. The loader utility is used to allow
loading of a configuration file into the target KM switch unit.
Note: Certain security settings may prevent the configurator to
download the file to the administrator's PC. Make sure your browser
security is configured correctly.
16