Turning An Id Sub-Bank On Or Off; Locking Out Talk Group Ids - Radio Shack PRO-93 Owner's Manual

Turning an ID Sub-Bank On or Off

Follow these steps to turn the ID sub-bank on or off dur-
ing the program mode:
1. Press
TRUNK
bank.
2. Press
FUNC
or off if it is on.
Follow these steps to turn the ID sub-bank on or off dur-
ing the scan mode:
1. Press
FUNC
channel transmission.
2. Press
TRUNK
is turned on or off, and the active sub-bank number
flashes.
3. Press
FUNC
desire to turn on or off. For example to turn sub-
bank 4 on or off, press

Locking Out Talk Group IDs

Note: You can only lock out talk group IDs when the
scanner is in the closed mode (see "Open and Closed
Modes" on Page 63).
1. Press .
PGM
2. Press
TRUNK
3. Press ,
FUNC
8 8 8 8
4. Press or
5. Press
L/OUT
6. To remove the lockout from a trunking ID, manually
select the ID memory, and press
pears.
You can confirm the ID code while the scanner shows
the text when the received signal is a voice channel.
repeatedly to select the desired sub-
then to turn the sub-bank on if it is off
1
while the scanner is stopped on a voice
. The display indicates which sub-bank
and the number of the sub-bank you
then
FUNC
.
8 8 8 8 9 9 9 9
or to move to the desired bank.
9 9 9 9
to select the ID memory.
to lock out the ID.
Trunking Operation
.
4
Bý Bý Bý Bý
appears.
ý ý ý ý
until disap-
L/OUT ( ( ( (
61