Radio Shack PRO-93 Owner's Manual page 36

4. Press
ENTER
moves to . If the entered frequency is incorrect,
$ $ $ $
%EM8C@;ý"I<H %EM8C@;ý"I<H %EM8C@;ý"I<H %EM8C@;ý"I<H
5. Enter your desired higher-end frequency and press
.
ENTER
6. Rotate
SQUELCH
point just after the hissing sound stops.
7. Press
SEARCH
ner finds an active frequency, it stops searching.
Special Notes:
• You can copy and save a frequency into a specified
bank, channel, or priority channel when the scanner
finds an active frequency. See "Using Frequency
Copy Function" on Page 39 to save the frequency.
The frequency copy functions only in search banks
2, 3, 4 and 5.
• While the scanner is searching, you can use the
seek search by pressing
indicates
/<<Bý +* /<<Bý +*
/<<Bý +* /<<Bý +*
stops at an active frequency for five seconds and
restarts searching automatically. The scanner
repeats this operation.
• You can set Zeromatic on or off by pressing
then . Press
0
omatic setting. Whenever this feature is turned on,
6 6 6 6 <IF <IF <IFD D D D 8K@: <IF 8K@:ý ý ý ý +* 8K@: 8K@: +* +* +*
first digit of the second line and the scanner stops at
the correct frequency. When you turn this feature
off, disappears and the scanner stops when it
Q Q Q Q
detects an active signal. Zeromatic functions only in
search bank 2, 3, 4 and 5.
• There are several group banks in SR2 Police/Fire
and SR4 ham bands. You can turn off or on the
groups by pressing the group numbers. For exam-
ple to turn off
• In the Air and the Limit search bands, press
8 8 8 8
then to start searching up from the lowest fre-
36
to set the frequency. The cursor
briefly appears.
clockwise and leave it set to a
to start searching. When the scan-
FUNC
at the bottom line. The scanner
then again to reverse the Zer-
FUNC 0
briefly appears then
, press .
ò ò ò ò 0
Operation
then . The display
7
FUNC
appears at the
Q Q Q Q
FUNC