Using Frequency Copy Function; Copying A Frequency Into A Specified Channel - Radio Shack PRO-93 Owner's Manual

The display indicates the type of message, and
sounds an alert or series of beeps which automati-
cally changes every 3 seconds.
2. Press any key except

USING FREQUENCY COPY FUNCTION

You can copy a frequency into a specified channel, a va-
cant channel in a specified bank, or a priority channel.
However, you cannot copy a frequency from the Marine
and CB search bands.
Copying a Frequency into a Specified
Channel
You can copy a frequency into a specified channel when
the scanner stops on that frequency during search mode
or manual tuning.
1. Press
FUNC
á?8Eý/KFI<å á?8Eý/KFI<å á?8Eý/KFI<å á?8Eý/KFI<å
1 second, the frequency to be copied flashes on the
indicator.
2. Press the desired bank and the channel number
where you want to store the frequency. The display
indicates the bank and channel number. After about
1 second, the frequency to be copied flashes.
3. Press
ENTER.
mode and delay condition are copied on the chan-
nel.
á?8Eý/KFI<ü á?8Eý/KFI<ü á?8Eý/KFI<ü á?8Eý/KFI<ü
matically returns to search mode.
If you try to copy a frequency which is already
stored, the scanner sounds the notice tone 3 times
after you press
bottom line. If you want to copy the duplicate fre-
quency anyway, press
cancel.
to stop test sound mode.
then when you find a frequency.
PGM
appears at the bottom line. After about
All the conditions such as receiving
briefly appears. The scanner auto-
.
ENTER LGCô=ýá?OOO LGCô=ýá?OOO
LGCô=ýá?OOO LGCô=ýá?OOO
ENTER
Operation
appears at the
, or if not, press
CL
to
39