NETGEAR ProSafe SRXN3205 Reference Manual page 74

ProSafe Wireless-N VPN Firewall SRXN3205 Reference Manual
Configuring WPA-PSK
Not all wireless adapters support WPA. Furthermore, client software is required on the client.
Windows XP and Windows 2000 with Service Pack 3 or above include the client software that
supports WPA. Nevertheless, the wireless adapter hardware and driver must also support WPA.
Consult the product document for your wireless adapter and WPA client software for instructions
on configuring WPA settings.
Figure 4-9
To configure WPA-PSK in the Wireless Settings menu:
1. Click the WPA radio button on the left to enable WPA data encryption.
When you select the WPA data encryption, only the feature selections for WPA are made
active on screen, while the other options and features remain grayed out.
2. Select PSK from the WPA with drop-down menu on the right.
3. Click on the TKIP radio button for Encryption on the right.
4. In the PSK Settings section, enter text in the Passphrase text box (Network Key) with 8-63
characters.
5. Enter a value for Key Lifetime text box in minutes.
6. Click Apply to save your settings.
4-18
v1.0, July 2008
Wireless Configuration