Inbound Traffic - NETGEAR ProSafe SRXN3205 Reference Manual
Wireless-n vpn firewall
Hide thumbs
Also See for ProSafe SRXN3205:
- Datasheet (4 pages) ,
- Reference manual (218 pages) ,
- Installation manual (2 pages)
Table of Contents
Advertisement
ProSafe Wireless-N VPN Firewall SRXN3205 Reference Manual
•
If another device on your network will be the DHCP server, or if you will manually
configure all devices, click Disable DHCP Server.
If the DHCP server is enabled, enter the following parameters:
•
Domain Name. (Optional) The DHCP will assign the entered domain to its DHCP clients.
•
Starting IP Address. Specifies the first of the contiguous addresses in the IP address pool.
Any new DHCP client joining the LAN will be assigned an IP address between this
address and the Ending IP Address. The IP address 192.168.1.2 is the default start address.
•
Ending IP Address. Specifies the last of the contiguous addresses in the IP address pool.
The IP address 192.168.1.100 is the default ending address.
Note: The Starting and Ending DHCP addresses should be in the same subnet as
•
Primary DNS Server. (Optional) If an IP address is specified, the VPN Firewall will
provide this address as the primary DNS server IP address. If no address is specified, the
VPN Firewall will provide its own LAN IP address as the primary DNS server IP address.
•
Secondary DNS Server. (Optional) If an IP address is specified, the VPN Firewall will
provide this address as the secondary DNS server IP address.
•
WINS Server. (Optional) Specifies the IP address of a local Windows NetBios Server if
one is present in your network.
•
Lease Time. Specifies the duration for which a DHCP-provided IP address will be leased
to a client.
•
Enable DNS Proxy. When DNS proxy is enabled (default), the DHCP server will provide
the SRXN3205 LAN IP address as the DNS server for address name resolution. If this box
is unchecked, the DHCP server will provide the ISP's DNS server IP addresses. The VPN
Firewall will still service DNS requests sent to its LAN IP address unless you disable DNS
Proxy in the DHCP settings (see
4. Click Apply to save your settings.
Note: Once you have completed the LAN setup, all outbound traffic is allowed and
all inbound traffic is discarded. To change these default traffic rules, refer to
Chapter 5, "Firewall Security and Content
3-4
the LAN IP address of the VPN Firewall (the IP Address configured in the
LAN TCP/IP Setup section).
"Attack Checks" on page
v1.0, July 2008
5-10).
Filtering.
LAN Configuration
Advertisement
Table of Contents
