NETGEAR ProSafe SRXN3205 Reference Manual page 35

6. If your ISP is Austria Telecom or any other ISP that uses PPTP as a login protocol:
a. Select Austria (PPTP).
b. Configure the following fields:
• Account Name (also known as Host Name or System Name). Enter the valid account
name for the PPTP connection (usually your e-mail name as assigned by your ISP).
Some ISPs require entering your full email address here.
• Domain Name. Your domain name or workgroup name assigned by your ISP, or your
ISPs domain name. You may leave this field blank.
• Idle Timeout. Check the Keep Connected radio box to keep the connection always
on. To logout after the connection is idle for a period of time, click Idle Time and enter
the number of minutes to wait before disconnecting in the timeout field. This is useful
if your ISP charges you based on the amount of time you have logged in.
• My IP Address. IP address assigned by the ISP to make the connection with the ISP
server.
• Server IP Address. IP address of the PPTP server.
7. If your ISP is Telstra BigPond Cable:
a. Select BigPond Cable.
b. Configure the Login Server and Idle Timeout fields.
The Login Server is the IP address of the local BigPond Login Server in your area.
8. Review the Internet (IP) Address options.
Figure 2-9
These options are inactive if BigPond Cable is selected???.
9. If your ISP has assigned a fixed (static) IP address, select Use Static IP Address, and
configure the following fields:
Connecting to the Internet (WAN)
ProSafe Wireless-N VPN Firewall SRXN3205 Reference Manual
v1.0, July 2008
2-9