NETGEAR ProSafe SRXN3205 Reference Manual page 89

• Quality of Service (QoS) priorities. Each service at its own native priority that impacts its
quality of performance and tolerance for jitter or delays. You can change this QoS priority if
desired to change the traffic mix through the system (see
Priorities" on page
Outbound Rules (Service Blocking)
The SRXN3205 allows you to block the use of certain Internet services by PCs on your network.
This is called service blocking or port filtering.
Note: See "Enabling Source MAC Filtering (Address Filter)" on page 5-24
another way to block outbound traffic from selected PCs that would otherwise be
allowed by the firewall.
Table 5-1. Outbound Rules
Item Description
Service Name Select the desired Service or application to be covered by this rule. If the desired
service or application does not appear in the list, you must define it using the
Services menu (see
Action (Filter) Select the desired action for outgoing connections covered by this rule:
• BLOCK always
• BLOCK by schedule, otherwise Allow
• ALLOW always
• ALLOW by schedule, otherwise Block
Note: Any outbound traffic which is not blocked by rules you create will be allowed by
the Default rule.
ALLOW rules are only useful if the traffic is already covered by a BLOCK rule. That
is, you wish to allow a subset of traffic that is currently blocked by another rule.
Action (Select Select the desired time schedule (Schedule1, Schedule2, or Schedule3) that will be
Schedule) used by this rule.
• This drop down menu gets activated only when "BLOCK by schedule, otherwise
• Use schedule page to configure the time schedules (see
Firewall Security and Content Filtering
ProSafe Wireless-N VPN Firewall SRXN3205 Reference Manual
5-19).
"Adding Customized Services" on page
Allow" or "ALLOW by schedule, otherwise Block" is selected as Action.
Block or Allow Traffic" on page
v1.0, July 2008
"Setting Quality of Service (QoS)
5-20).
for yet
5-17).
"Setting Schedules to
5-3