Creating A Vpn Tunnel To A Gateway - NETGEAR ProSafe SRXN3205 Reference Manual

ProSafe Wireless-N VPN Firewall SRXN3205 Reference Manual

Creating a VPN Tunnel to a Gateway

You can configure multiple gateway VPN tunnel policies through the VPN Wizard. You can also
set up multiple remote VPN client policies through the VPN Wizard. A remote client policy can
support up to 200 clients.
To set up a gateway VPN Tunnel using the VPN Wizard:
1. Select VPN > IPsec VPN from the main/submenu.
2. Click the VPN Wizard tab and the VPN Wizard screen displays.
Figure 6-1Need new screenshot
1. Select Gateway as your VPN tunnel connection.
The wizard needs to know whether you are planning to connect to a remote gateway or setting
up the connection for a remote client PC to establish a secure connection to this device.
6-2 Virtual Private Networking Using IPsec
v1.0, July 2008